Crawler luokkien säännöt kaudelle 2022
Lähetetty: To 23.12.2021 11:15
Merry Christmas crawlers! 🎄
Today we have finally finished the 2022 Official WRCCA Rules:
https://docs.google.com/document/d/1rI- ... p=drivesdk
Changes:
Mini:
Addition
▪ 2.5.8 - Motor must be chassis mounted. Motor mount cannot be part of or directly coupled to an axle.
Performance Scale:
Changed rules
• 2.6.2.2 - Tires are limited to 4.8”/122mm maximum external diameter and a maximum width of 55mm from side wall to side wall. Tire size will be determined by advertised manufacturer specs. (Tires without available specs will be measured off the truck as mounted on the wheel laid flat).
• 2.6.2.3 - Siping, grooving, shaving and removal of the lugs from any kind of production tire is allowed as long as they meet rule 2.6.2.2 Only production tires are allowed that meet 2.6.2.2 rules. Internal tire modifications permitted are trimming and sanding of tires.
•2.6.2.4 - Original size of the tire must be maintained. Cut and shut, narrowing, reducing or increasing, of any kind, is not allowed. Tire carcass cannot be cut.
•2.6.2.5 - Production pin tires, even if they meet rule 2.6.2.2, are not allowed.
• 2.6.1.2 - Vehicles must run a minimum full body from the grill to the B-pillar. The grill can not be cut or modified. (Bodies without a grill must have full hood/bonnet). Wheel arches and headlights may be trimmed for clearance.
• 2.6.1.3 - Cab only configured rear chassis must have frame or bar work or tray (bare chassis and shock hops is not acceptable). Removal of the roof is allowed so long as roll gage/half interior is fitted.
Deleted rules
• 2.6.1.10 - All throttle electrics, motor and transmission are to be covered by the body/tray when viewed from above.
• 2.6.2.5 - Wheels/rims must be a minimum 1”/25mm wide at outer bead ring surface.
Today we have finally finished the 2022 Official WRCCA Rules:
https://docs.google.com/document/d/1rI- ... p=drivesdk
Changes:
Mini:
Addition
▪ 2.5.8 - Motor must be chassis mounted. Motor mount cannot be part of or directly coupled to an axle.
Performance Scale:
Changed rules
• 2.6.2.2 - Tires are limited to 4.8”/122mm maximum external diameter and a maximum width of 55mm from side wall to side wall. Tire size will be determined by advertised manufacturer specs. (Tires without available specs will be measured off the truck as mounted on the wheel laid flat).
• 2.6.2.3 - Siping, grooving, shaving and removal of the lugs from any kind of production tire is allowed as long as they meet rule 2.6.2.2 Only production tires are allowed that meet 2.6.2.2 rules. Internal tire modifications permitted are trimming and sanding of tires.
•2.6.2.4 - Original size of the tire must be maintained. Cut and shut, narrowing, reducing or increasing, of any kind, is not allowed. Tire carcass cannot be cut.
•2.6.2.5 - Production pin tires, even if they meet rule 2.6.2.2, are not allowed.
• 2.6.1.2 - Vehicles must run a minimum full body from the grill to the B-pillar. The grill can not be cut or modified. (Bodies without a grill must have full hood/bonnet). Wheel arches and headlights may be trimmed for clearance.
• 2.6.1.3 - Cab only configured rear chassis must have frame or bar work or tray (bare chassis and shock hops is not acceptable). Removal of the roof is allowed so long as roll gage/half interior is fitted.
Deleted rules
• 2.6.1.10 - All throttle electrics, motor and transmission are to be covered by the body/tray when viewed from above.
• 2.6.2.5 - Wheels/rims must be a minimum 1”/25mm wide at outer bead ring surface.