Monipuolinen laturi purkutoiminnolla. Toimii sekä 12 voltilla, että 230 voltilla verkkovirrasta. Siisti sinihohtoinen taustavalo.
Functions:
# Charge
# Discharge
# Cycle
# 1 ... 5 x discharge - charge
# 1 ... 5 x charge - discharge
# Display of charge and discharge time
# Display of charged-in and discharged capacity
# Display of charge voltage
# Variable charge / discharge current and cell count.
# NC / NiMH batteries 1 ... 14 cells
# The automatic digital Delta Peak cut-off circuit switches off the charge process at the correct time, and is designed to suit both NC and NiMH batteries.
# Lithium / LiPo batteries 1 ... 5 cells
# Display of individual cell voltages in LiPo batteries if a TOP Equalizer 6S (No. 8488) is used.
# Automatic charge cut-off using CC-CV charge process, which terminates the charge at a final voltage of 4.2 Volts per cell.
# Lead-acid batteries 1 ... 6 cells (2 ... 12 Volt)
# Automatic charge cut-off using CC-CV charge process, which terminates the charge at a final voltage of 2.35 Volts per cell.
Specification:
Input voltage: 10...15 Volt-DC oder 100-240 V AC mit Netzteil
Charge termination: automatisch
Trickle charge: 200 mA
Dimensions: 140 x 108 x 52 mm
Charge current: 0.1...5 A (max. 50 W) A
No. of NC cells: 1...14 NC/NiMH 1...5 Lithium (3.6V) oder LiPO (3.7V) 1...6 PB/Blei
more Specifications:
Clear display of charge parameters and battery data on the large, backlit 2 x 16 character LCD screen.
The Compact 12 V charger can also be operated from the mains if it is connected to the SPS 100 - 240 V 5 A mains power supply, No. 8485
If a Top Equalizer 6S (No. 8488) is connected, the individual cells in the LiPo pack are brought to the same voltage level, and at the same time the individual cell voltages are displayed on the LCD screen.
Pätevä laite, kohtuu pieni kokoinen kaikkine lisähärpättimineen.
Eikä ole hinnalla pilattu, alle 100e hobbylinnastaThe LiPo TOP Equalizer is looped in between the LiPo charger and the LiPo battery itself.
During the charge process the Equalizer monitors the individual series-connected LiPo cells in the pack and automatically brings them to the same voltage level. This is necessary because the individual cells vary slightly in their state of charge, or voltage level, when they are discharged. Overcharging or deep-discharging LiPo batteries causes permanent cell damage.
The parameters for final charge voltage and charge current are set on the charger. In contrast to the familiar voltage controllers, the Equalizer starts correcting voltage differences as soon as the charge process starts.
Over-voltage cut-off:
The units feature a special safety function in the form of an excess voltage cut-off circuit which stops the charge process as soon as one cell reaches 4.3 Volts. All the cells wired together in series must be connected to the TOP Equalizer via a sensor lead; this is necessary for voltage measurement. Current ready-made robbe LiPo batteries are fitted with the appropriate connector as standard. The voltage sensor leads required are also available separately, allowing existing LiPo batteries to be upgraded as required.
Specification:
Input voltage: vom Ladegerät
Dimensions: 84 x 48 x 14 mm
Weight: 60 g
Charge current: vom Lader max. 10 Ampere A
No. of NC cells: 2...6 LiPo