RC-offi.net

Bagdaröök


Bagdaröök - European Champion 2015

Technical shit:
Akselit: Axial XR-10 superwide
Runko: DravTech Super SuDu
Linkit: Dlux titanium
Moottorit: Team Brood Racing Apocalypse HHK-T 45T
Noparit: Holmes Hobbies BRXL
BECit: Castle Creations 10A
Servot: Hitec HS7980TH
Akut: Turnigy Nano Tech 1000mAh 50-90C 3S LiPo
Renkaat: E.Y. Designs Super VooDoos & Team Losi Boss Claws (made bigger)
Vanteet: Dlux Solid Face
Foamit: Crawler Innovations 7,75" Double Deuce
Iskarit: Traxxas 3,5" Big Bores
Jouset: Team Losi Mini-T Front (Pink springs)
Radiot: Sanwa MT-4
Paneelit: Krawler Konceptz
Muuta:
- Swiss Custom Products knuckle weights and holders
- Vanquish Products XR-10 shafts
- RC4WD gears in the axles


Sijoituksia matkan varrelta:

2017:
Nordics (Nordic Championships) Vantaa, Suomi: 1
Finnish RC Crawling Series #1, Helsinki: 1
Finnish RC Crawling Series #3, Naantali: 1
Finnish RC Crawling Series #4, Pori: 1

2016:
RC Crawler Worlds (World Championships) La Couronne, Ranska: 2
Nordics (Nordic Championships) Tanum Strand, Ruotsi: 2
Finnish RC Crawling Series #1, Vantaa: 1
Finnish RC Crawling Series #2, Kirkkonummi: 1
Finnish RC Crawling Series #3, Naantali: 1
Finnish RC Crawling Series #4, Rauma: 1
Finnish RC Crawling Series #5, Lappeenranta: 2

Finnish RC Crawling Series 2016: 1

2015:
EuroCrawl (European Championships) Almuñécar, Espanja: 1
Nordics (Nordic Championships) Tjøme, Norja: 2

Kisoja takana: 13

#1: 9
#2: 4

Sveitsistä?

[quote="Samuli"]
Sveitsistä?
[/quote]

Sveitsistä.

So, it's finally time to start building my new supah! I fell in deep love with the class again in the Worlds fighting for the victory with Manu.

How did I end up buying a super again? After few beers after the courses in Worlds, I asked may I try farmertom's super xr. It all lead to this:


Here is what I'm starting with. I removed the chassis, links and shocks from Tom's build.


Electric pack contains 2x HH BRXL's and 2x CC BEC's. Set that I wont be changing.


Rear axle and the apocalypse motor. My idea is to buy some SISU's for the motors at some point.


Front axle is a top notch work from farmertom too. I'm pleased, that I don't need to start the build from scratch.


These wheels are waiting for some saweeeeet E.Y. Designs Super VooDoos!


Loving the steering that XR axles give!


There is some money involved to build these axles (4 sets of VP shafts)


Here is front axle. It really does steer this!


SCP knuckle weights are awesome!

Now I have to start ordering the rest of the parts to this giant. It's first comp will be EuroCrawl in France on may 2015. Michelle promised to make the skins for it, as soon as we get the chassis to this. No more words of it yet.

It's good to be back with the big boys toys!

Runkoa alkaa pukkaamaan DravTechilta. Pian pääsee niputtamaan.







DravTech Super SuDu!  8)

Mielenkiintoisen näköinen. Väritys kunnossa :)!

Kiva tukirakenne! Ja pirteä väri!

Aika painavan näköinen tuo tukirakenne.

[quote="Pasi"]
Aika painavan näköinen tuo tukirakenne.
[/quote]

Se on 3D tulostettu ja paino jää pienemmäksi noilla versus delrin/alutangot tuolla välissä. Samalla kuitenkin tukevampi noin.  ;)

Some goodies arrived today! I was anxious to get building!


From DravTech.


The new SuDu Super chassis.


And some überlight 3D printed goodness.


Building it straight away!


These are so nicely finished parts. And really light!


Assembled now with aluminium screws.


It really does look a piece of art.


Weight isn't too bad at all.


With nearly all of the stuff onboard we are sitting some grams under 3 kilos.


This is how it'll look with them small Boss Claws. Can't wait to see it with crazy ass VooDoos.


Links and skins are now in production. So soon all of the stuff is here.


Just taking some fancy shots.


I put 4" long big bores and set the wb to 17,5". They are waaaaaay too tall!


Yes, it needs the links...


I have 3,5" big bores on the way, and if those are still too tall, I'm gonna go with scx10 shocks.


Size comparation.

Now it'll stay there and wait for the rest of the parts to show up.

Koripaneeleita taas suunnittelussa Kanadassa:

Paneelit nyt valmiina. Kyllä on persoonaa kerrakseen taas!  ;D

Komiaa!   8)

All I can do for the moment is the little stuff with the rig. Shocks today.


3,5" big bores ready for assembling.


I wanna match them colors!


Now we're talking!


Wheelbase 17,5" right there.


Now let's get back to waiting.

Well, unfortunately I had to throw my SD memory card to the trash can... There was all the building stuff of this thing. I got some time today to make new photos and video though.


Finally roller!


With the Dlux links, the rear end sets out nicely. Just put Jato rod ends in the axle side with the lowers. Perfect like this IMO.


In front otherwise same issue as the rear; Jato rod ends to axle side. Uppers were 10mm too long, so I had to make my own uppers for now. Just have to shortern the other ones a little.


The difference.


Drive height wb is little over 17" and fully compressed little under 18".


Looks great like that.


Here you can see Jato rod ends on lower links in axle side.


Typical Revo rod ends in chassis side. A closer look on the awesome 3D printed skid plate!


With this suspension setup I think ideal flex is achieved. 7 inches.


Hmm... Let's throw the electronics on the roof a play a little!

https://www.youtube.com/watch?v=PT75krW ... GFl4TY7TsQ
Wish the snow was gone. Now this is all I have. It's hard to get used to the fact that I put the rear steer on the lever in my Sanwa MT-4. Usually I use it as a dig in my pro. Great fun anyhow!


I'm probably taking this to next weekends indoor comp with me. If I have time left there I could play a little again. Otherwise it has to wait for the snow to melt. Still waiting for my skins and the big ass Voodoos to arrive. Both have been shipped already. Looking good at the moment!

Erittäin hyvältä näyttää, tuolla on varmasti mahtava ajaa kauden mätöt!   8)

Paneelit valmiina Kanadassa. Huomenna lähtee tännepäin. Autohan on valmistumassa!  8)

I had some more time to work this out.


Tobias noted me, that my front lower links were wrong way around.


After changing them, I noted it too.


Looks better now, with the bend on front.


Possible spot for electronics?

My super Voodoos are now in finnish customs and I'm hoping to get them by the end of the week. I won't take this to the indoor comp, cause of the limited space of the Bunker. Also I wan't to constantrate on my 2.2 rigs in this comp. I'll continue with this rig after the comp.

Some stuff arrived yesterday!


Hmmmm... Skins or the tires?


Some E.Y. Designs goodies!!


7.8" tall Supa Voodoos!


0.3" taller than my old Boss Claws. I think this will be perfect height.


Next thing would be glueing them on.


Now I'm only waiting for her dress to arrive. Should be here in any day now.

A huge thanks to Everett for making these bad boys!

Some progress made yesterday!


And the final package for the rig!


Top notch KK magic! Thanks Michelle and Rob!


She is soon ready to jump aboard!


That font is simply über cool!


The hood.


Glued my tires already.


Ready for test walk in the weekend.


Height difference to Boss Claws.


Just pre looking, what it'll be like. This thing is gonna look epic!


Speechless.


RTR weight with everything on it. Gonna try to get it under 3kg.


I have a set of SCX10 shocks ready for it. The weight will come down by some grams from there.


Will attach skins in the weekend and do some testing.


I'm really looking forward to drive this thing on the rocks!

More stuff next week. Stay tuned!