"Epäkelpo lomake" tyyliset virheet kirjautumisessa pitäisi olla nyt historiaa. T. ylläpito

Koppensneller

2.2m -luokat autot tänne. (Ennestään 2.2 Pro)
Zarizi Tech
Moderator
Viestit: 4806
Liittynyt: To 26.04.2007 21:10
Paikkakunta: Rovaniemi
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja Zarizi Tech »

Time to move on from the Worlds. I'm gonna show you some pics from there in the near future. But now update after RFOT's Crawl Cup Comp 5.

Kuva
We had a cool scenery in this comp. It was located in Turku. On top of a citys highest point. Kuva

Kuva
We had four competitors in pro and four in shafty. Cool that the pro class is finally rising in our team as well! Kuva

Kuva
First course!

Kuva
Going for the bonus gates. Of course. Kuva Slight changes to the rig before this comp. I put back the SCX shock caps and inserted the blue mini-t springs to the rear shocks. Now the rig seems to be more calm to drive. Need more testing though. Kuva

Kuva
Feeling quick on the finnish rocks after the Worlds. Kuva

Kuva
First two courses perfect scores -50 on both. We changed the course design to our comps to match the worlds design. 5min and three -50 point bonuses. It's good way I think! Kuva

Kuva
Here is photos from the last course.

Kuva
Tight spot right there. From the third course I did hit a bonus gate exiting from it. That was the first mistake of the day. Luckily it was -10 bonus, so it's like +-0 then.

Kuva
Different type of bonus gate! Kuva

Kuva
On this last course there was this gate, which turned out to be impossible. I tried three times and at the end had to take one rollover and the lower gate. Kuva

https://www.youtube.com/watch?feature=p ... 5DdAXuetfQ
Video from course number two. The gates were really easy, because the course was builted in the morning, when the rocks were damp. It dryed over, so it was just driving after that.

Kuva
Here are the results of this comp. Quite happy of my performances.

Tomorrow we are heading to our southern neighbour country Estonia. Me and my brother will attend to their final comp of the series 2014. The terrain looks really interesting, so I'm already looking forward to it. Kuva
Samu Sarka, RFOT, FIN
Member of ERCCA
Extreme Route Crawlers

5x World Champion
18x European Champion
30x Nordic Champion
3x Sudics Champion
28x Finnish Champion
3x German Champion
2x US Champion
2x Spanish Champion
2x Italian Champion
2x Belgium Champion
Zarizi Tech
Moderator
Viestit: 4806
Liittynyt: To 26.04.2007 21:10
Paikkakunta: Rovaniemi
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja Zarizi Tech »

I have returned from Estonia. Kuva Good trip once again!

Kuva
Sunday morning leaving from home at 4AM. Here we are going to the ferry which would take us to Estonia.

Kuva
Once we had sailed two hours we reached the other side. Kuva Weather was good, apparently some sunshine in front!

Kuva
We made the trip to comp site and prepared the rigs for first course. Kuva

Kuva
At first the terrain looked really interesting...

Kuva
Then we found the rocks. It would not be an easy day... Kuva

Kuva
If the rig starts falling in there, it's going there hard. Kuva

Kuva
On the pics these rocks looks small. But they were really fun to drive on. Kuva

Kuva
First course! Time to start driving. Kuva

Kuva
On two first courses there were still lot's of places, which weren't exactly clean. Kuva

Kuva
First course without mistakes, good start! Kuva

Last three pics filmed by: antix - http://www.crawl.ee

Then the video corner! And this being a abroad comp, I will show all of my performances! Kuva

1 rada - (-30/-30)
https://www.youtube.com/watch?feature=p ... 7E75CmBMoQ
First course. Little bit nervous of the first gate. It was quite narrow, but luckily I have a narrow rig. In the estonian way, they had 10min/course and one bonus, which is -5 points and can be done two times. But you have to drive regular gate in between. So no problems for the time limits for me. With the time stress out of my mind, I could just drive the speed I do when I'm training. First course went perfect, but on the other hand it should, cause the other drivers drove well too. Kuva

2 rada - (-30/-30)
https://www.youtube.com/watch?feature=p ... aTcttgtWOg
On course two there was few gates, that does not require Voodoos. More like swamppers Kuva This course was relatively easy, but there was tricky gate nine with boundary. I had to try to jump the rig on top of the rock. Luckily I have the stubbies still singing. Kuva

3 rada - (-30/-30)
https://www.youtube.com/watch?feature=p ... p6n_x-LH6A
This course was by far the hardest of the day. Here I had to adjust my driving to go slower, than normal. That's because there was many really tricky places. Already the first two gates were really tight. That was the spot where I was the only one to go without gate. Kuva Gates three and four were also difficult. I had to go down, when the front wheel rised, but I got a better line from there. Rest of the course went smoothly and I got another perfect score! Kuva

4 rada (-30/-30)
https://www.youtube.com/watch?feature=p ... JBtazxSzIw
The fourth course looked like it was going to be easiest of the day. After I looked at it, I thought heck, I can do a perfect day. After that thought it was quite clear that I want a perfect run. And several minutes after that, it was done. Kuva What a race! The stup is proving to be better with the blue spings on the rear shocks, it feels very   stable to drive now. Kuva

Kuva
Here are the results. One of the best comps in my life as in terms of driving. Kuva After the comp we went straight to the ferry and arrived home on 3AM monday morning. So it was a long day... Kuva We will definately go to Estonia next year as well! Thanks to the friendly guys over there.

Next comp will be held on saturday and it will be the last comp for this rig in our season. Gotta make most of it! Some rumours are in the air, that LaaLaa might be attending? Kuva
Samu Sarka, RFOT, FIN
Member of ERCCA
Extreme Route Crawlers

5x World Champion
18x European Champion
30x Nordic Champion
3x Sudics Champion
28x Finnish Champion
3x German Champion
2x US Champion
2x Spanish Champion
2x Italian Champion
2x Belgium Champion
villu18
Nyyppä
Viestit: 16
Liittynyt: La 14.06.2014 11:14
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja villu18 »

Zarizi Tech kirjoitti:
3 rada
Already the first two gates were really tight. That was the spot where I was the only one to go without gate. Kuva
I also got through these two first gates, nicely ;)

It was nice thate you came to our comp.
See you next year
Scale
Zarizi Tech
Moderator
Viestit: 4806
Liittynyt: To 26.04.2007 21:10
Paikkakunta: Rovaniemi
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja Zarizi Tech »

villu18 kirjoitti:
Zarizi Tech kirjoitti:
3 rada
Already the first two gates were really tight. That was the spot where I was the only one to go without gate. Kuva
I also got through these two first gates, nicely ;)

It was nice thate you came to our comp.
See you next year
Oh, sorry. I didn't see your run there, I think! That's good job dude!   ;) Those two gates were really tight.   :o
Samu Sarka, RFOT, FIN
Member of ERCCA
Extreme Route Crawlers

5x World Champion
18x European Champion
30x Nordic Champion
3x Sudics Champion
28x Finnish Champion
3x German Champion
2x US Champion
2x Spanish Champion
2x Italian Champion
2x Belgium Champion
Zarizi Tech
Moderator
Viestit: 4806
Liittynyt: To 26.04.2007 21:10
Paikkakunta: Rovaniemi
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja Zarizi Tech »

Ok folks, finally some updates of the last comp of season 2014. RFOT's Crawl Cup Comp 6 in Lahti.

Kuva
Five drivers listed up to 2.2 Pro. Kuva Sadly again, not LaaLaa. Kuva

Kuva
Cold day to drive a comp, but since it was the last of the series, we managed. Kuva

Kuva
Lahti offered us some great rocks behind old school. Still giving some grip, even though it was really cold out there.

https://www.youtube.com/watch?feature=p ... WUHLsiYEp8
And this is a clip from course four. Easy one, if you count off that last bonus I tried a couple of times. Just didn't have the time to make it out clean. That was awesome set of gates. Kuva

Kuva
Clear victory from this comp. Course three was a real pain in the ass. First positive score in a loooong time. Kuva

Kuva
In the cup results Koppensneller is to be found from the first spot as well. Next year this series should be interesting, since now our club members have pro rigs as well. Kuva

First season with this rig is now completed.

Spanish Champion
German Champion
Scandinavian Champion
Finnish Champion
RFOT club champion
4th spot in the Worlds


All of this means, that I have lots to improve to the next season. More training and some tuning as we head down to 2015. After the season, I'm pleased to say that I have no regrets of jumping to the B2 axles. Kuva Rig has been amazing, but now it's time to tune it little bit more to make it even better. No big changes, but now I can say what needs to be better and I can focus on those things.

Next year my calendar includes EuroCrawl in France, Nordics in Norway, Worlds somewhere in States, Finnish National series and of course our local series. Lot's of comping to do in next summer as well. Kuva

After all I want to thank all of the great sponsors for helping me during the season! It definately wouldn't be the same without you! Kuva

RC4WD
Nordic Crawler Desings
Team Brood Racing
EuroRC
offipaita.fi


Stay tuned for winter updates! Our first comp of 2015 will be in the middle of January, so tuning need to be done quickly! Kuva
Samu Sarka, RFOT, FIN
Member of ERCCA
Extreme Route Crawlers

5x World Champion
18x European Champion
30x Nordic Champion
3x Sudics Champion
28x Finnish Champion
3x German Champion
2x US Champion
2x Spanish Champion
2x Italian Champion
2x Belgium Champion
Zarizi Tech
Moderator
Viestit: 4806
Liittynyt: To 26.04.2007 21:10
Paikkakunta: Rovaniemi
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja Zarizi Tech »

Sadly, because Nordic Crawler Desings is now history, it's not sponsoring me anymore. Nor is EuroRC from Finland. But the good news is, that I have four new ones!

Team Ottsix - I want to drive them best crawling tires there is. On all of my rigs! Kuva Voodoos!

E.Y. Designs - Somebody has to make the hard work of cutting and shutting the awesome tires to my rigs and that would be E.Y. Designs!

DravTech - I'm going to get some good old NCD stuff from my friend in Sweden. And of course all the other amazing stuff Dravpnir makes! Kuva

Krawler Konceptz - Even though they don't take team drivers, I wan't to make sure where is the best customer service in the whole world! If you need skins, well do I need to say more... Kuva

Kuva

Thank you everyone!
Samu Sarka, RFOT, FIN
Member of ERCCA
Extreme Route Crawlers

5x World Champion
18x European Champion
30x Nordic Champion
3x Sudics Champion
28x Finnish Champion
3x German Champion
2x US Champion
2x Spanish Champion
2x Italian Champion
2x Belgium Champion
Hadesbear
Legendaarinen!
Viestit: 3323
Liittynyt: Su 29.11.2009 14:47
Paikkakunta: Levi
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja Hadesbear »

Onnittelut menestyksekkäästä kaudesta 2014! Paljon saavutuksia ja välillä suvereeniä hallintaa. Ens vuonna jatketaa!   8)
Saku Sarka, RFOT, FIN
Zarizi Tech
Moderator
Viestit: 4806
Liittynyt: To 26.04.2007 21:10
Paikkakunta: Rovaniemi
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja Zarizi Tech »

Finally gathered up some pics from the Worlds! KuvaKuva

Kuva
Finals starting. What a great course! Kuva

Kuva
Pics are from the finals course.

Kuva
In the slippery gates Kuva

Kuva
Bonusbonus!

Kuva
The magic gate five. The hardest of the normal gates. Kuva

Kuva
Filmstar Koppensneller! Kuva

Kuva
Loosing awfully lot of time on gate nine there...

Kuva
Final results. After three months I'm still happy with the fourth position. Kuva

Kuva
Sunday night hangout with everyone on hotel's parking lot KuvaKuva

Kuva
ONE MORE ROUND of tequilas!! Kuva

Kuva
What a great trip alltogether! Something I will never forget. Kuva

PICTURES: Steven Kautz
Samu Sarka, RFOT, FIN
Member of ERCCA
Extreme Route Crawlers

5x World Champion
18x European Champion
30x Nordic Champion
3x Sudics Champion
28x Finnish Champion
3x German Champion
2x US Champion
2x Spanish Champion
2x Italian Champion
2x Belgium Champion
Zarizi Tech
Moderator
Viestit: 4806
Liittynyt: To 26.04.2007 21:10
Paikkakunta: Rovaniemi
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja Zarizi Tech »

I have new parts rolling in as the first comp of 2015 is getting closer. Kuva

Kuva
Some training batteries. Darn, the rig will be broken before all of those are finished. Kuva

Kuva
New, considerably lighter 3D prited skid by DravTech! Kuva

Kuva
Assembled!

Kuva
We'll see how well it slides.

Kuva
ESC's, BEC and the receiver will be zipped to there. Kuva

Kuva
New ESC's and BEC - ready for smashing! Kuva

My new axles from RC4WD are soon outside of the door as well. Kuva Old ones I used to my shafty, so I had to get a new set. Kuva I'll update this later. Now I have lots to do with all of my rigs. Kuva
Samu Sarka, RFOT, FIN
Member of ERCCA
Extreme Route Crawlers

5x World Champion
18x European Champion
30x Nordic Champion
3x Sudics Champion
28x Finnish Champion
3x German Champion
2x US Champion
2x Spanish Champion
2x Italian Champion
2x Belgium Champion
Zarizi Tech
Moderator
Viestit: 4806
Liittynyt: To 26.04.2007 21:10
Paikkakunta: Rovaniemi
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja Zarizi Tech »

A BIG thanks to RC4WD. Now I got a new pair of Bullies for a new season! Kuva

Kuva
Always nice to have a "fresh" start. Kuva

Kuva
Yep, still as exciting as the last time! Kuva

Kuva
Add knuckleweights and NCD carbon fiber stuff, throw some locktite to the screws and they are ready for 2015! Kuva

Kuva
Now I'll just have to get all the parts together. Kuva Luckily I have some holidays in christmas. Kuva

Skins are ready for shipping in Canada too, and tires are in the production as well. This should be ready in no time! Kuva
Samu Sarka, RFOT, FIN
Member of ERCCA
Extreme Route Crawlers

5x World Champion
18x European Champion
30x Nordic Champion
3x Sudics Champion
28x Finnish Champion
3x German Champion
2x US Champion
2x Spanish Champion
2x Italian Champion
2x Belgium Champion
Zarizi Tech
Moderator
Viestit: 4806
Liittynyt: To 26.04.2007 21:10
Paikkakunta: Rovaniemi
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja Zarizi Tech »

Finally I have the new axles, so it's time to build it again as a roller.

Kuva
Here's all the stuff that I need.

Kuva
New Dlux wheels for it. Kuva

Kuva
First I prepared the rear axle. As last year, I put locktite to the screws so they won't get loose.

Kuva
Same treat to the front axle. Now servo and knuckleweights attached as well.

Kuva
And before I knew I had the axles under the rig.

Kuva
Next thing will be soldering the new electronics.

Kuva
Now added the CF stuff on front axle and also tires from my shafty. Set which eventually will arrive to this rig will be exactly the same. Kuva

Kuva
Now I'll just have to wait the skins to arrive. In the mean time building the wheels and soldering the electronics. Kuva

Kuva
Brand new set of the same wheels I drove last year. Kuva

Kuva
For some reason I prefer the solid face version. Kuva

Kuva
There they are!

Kuva
That's what I'm about to continue as I get to the garage next time. My motors are also in preaparation for next season. Kuva
Samu Sarka, RFOT, FIN
Member of ERCCA
Extreme Route Crawlers

5x World Champion
18x European Champion
30x Nordic Champion
3x Sudics Champion
28x Finnish Champion
3x German Champion
2x US Champion
2x Spanish Champion
2x Italian Champion
2x Belgium Champion
Zarizi Tech
Moderator
Viestit: 4806
Liittynyt: To 26.04.2007 21:10
Paikkakunta: Rovaniemi
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja Zarizi Tech »

Ok, little more to update!

Kuva
Time to get packing these together!

Kuva
Plan is to put ESC's and BEC to a same package in the chassis. The receiver will go behind the axle.

Kuva
Preparing the stuff.

Kuva
All set, now just the hard part of soldering them all together...

Kuva
First they will all go to a same shrink ESC's and BEC.

Kuva
Wire by wire. Kuva

Kuva
Shortening the receiver wires too.

Kuva
Package is ready! Kuva

Kuva
Well, short enough wires now! Kuva

Kuva
Attaching them all with two zip ties. Good thing about this new DravTech skid! Kuva

Kuva
I cutted the electronic plate behind the front axle a bit. Just so receiver had enough space on it.

Kuva
There is the first package in chassis.

Kuva
And receiver behind the axle. Kuva

Kuva
All attached now. Can't yet test out if they work. I need to get my motors back first. Kuva

Kuva
New wheels on it. Kuva

Kuva
Now I'll just have to wait some parts. Off to build the next rig tomorrow. Kuva
Samu Sarka, RFOT, FIN
Member of ERCCA
Extreme Route Crawlers

5x World Champion
18x European Champion
30x Nordic Champion
3x Sudics Champion
28x Finnish Champion
3x German Champion
2x US Champion
2x Spanish Champion
2x Italian Champion
2x Belgium Champion
Avatar
LaaLaa
Legendaarinen!
Viestit: 1759
Liittynyt: Ti 18.11.2008 10:05
Paikkakunta: Lahti RC Crawlers

Re: #4 Koppensneller

Viesti Kirjoittaja LaaLaa »

Nordics champion 2017
WORLDS #2 2016
2.2 Pro Champion 2015
Scale C2 Champion 2015
Nordic #2 2015
2.2 Champion 2012
1.9 Champion 2012
Nordic Champion 2013
LRCC team driver
Zarizi Tech
Moderator
Viestit: 4806
Liittynyt: To 26.04.2007 21:10
Paikkakunta: Rovaniemi
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja Zarizi Tech »

Kiitos linkistä! Täytyy seuraavalle kerralle tilata jo valmiiksi. Saisi hiukan nätimmin ja fiksummin vielä noi piuhat.   :P Ei ole mun vahvinta alaa, ei todellakaan.   :(
Samu Sarka, RFOT, FIN
Member of ERCCA
Extreme Route Crawlers

5x World Champion
18x European Champion
30x Nordic Champion
3x Sudics Champion
28x Finnish Champion
3x German Champion
2x US Champion
2x Spanish Champion
2x Italian Champion
2x Belgium Champion
Avatar
LaaLaa
Legendaarinen!
Viestit: 1759
Liittynyt: Ti 18.11.2008 10:05
Paikkakunta: Lahti RC Crawlers

Re: #4 Koppensneller

Viesti Kirjoittaja LaaLaa »

Zarizi Tech kirjoitti:
Kiitos linkistä! Täytyy seuraavalle kerralle tilata jo valmiiksi. Saisi hiukan nätimmin ja fiksummin vielä noi piuhat.   :P Ei ole mun vahvinta alaa, ei todellakaan.   :(
Sitä paremmalla syyllä kannattaa hankkia heti alussa kunnon välineet, koska mikä vaan homma paskoilla välineillä pilaa lopputuloksen
Nordics champion 2017
WORLDS #2 2016
2.2 Pro Champion 2015
Scale C2 Champion 2015
Nordic #2 2015
2.2 Champion 2012
1.9 Champion 2012
Nordic Champion 2013
LRCC team driver
Zarizi Tech
Moderator
Viestit: 4806
Liittynyt: To 26.04.2007 21:10
Paikkakunta: Rovaniemi
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja Zarizi Tech »

LaaLaa kirjoitti: Sitä paremmalla syyllä kannattaa hankkia heti alussa kunnon välineet, koska mikä vaan homma paskoilla välineillä pilaa lopputuloksen
Totta turiset.   ;) Nuo löytyy kyllä seuraavasta HK:n tilauksesta.   8)
Samu Sarka, RFOT, FIN
Member of ERCCA
Extreme Route Crawlers

5x World Champion
18x European Champion
30x Nordic Champion
3x Sudics Champion
28x Finnish Champion
3x German Champion
2x US Champion
2x Spanish Champion
2x Italian Champion
2x Belgium Champion
Zarizi Tech
Moderator
Viestit: 4806
Liittynyt: To 26.04.2007 21:10
Paikkakunta: Rovaniemi
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja Zarizi Tech »

Kuva
Today I was able to continue the rebuild. The motors came to me and also the skins from Krawler Konceptz had arrived. Big thanks to R2 for rebuilding the motors and Michelle for a "new" design on the skins! Kuva

Kuva
I also want to thank Eddie from Crawler Innovations sending me this cell block! It's really cool! Kuva

Kuva
Old theme with new sponsors. I loved the Koppensneller theme, so why would I change it? Kuva Too bad I forgot the body reamer, so attaching the skins will be on tomorrows agenda.

Kuva
Front and rear motor on place. Kuva

Kuva
Looks like everything is ready for a test of the new electronics! Kuva

Kuva
No smoke! Yet. Kuva Test drive next.

Kuva
Again no smoke and everything seems to be working as they should. Motors definately came to live! Kuva

Kuva
The electronics setup once more.

Kuva
I wanted a similiar feeling to the suspension as in my sister's Smurfette XR. So I got myself a pair of Losi Mini Crawler soft springs.

Kuva
Feels much smoother now. Kuva

I'll have to attach the skins tomorrow and clock my rear axle, so the motor won't hang so low. Then this thing is ready for next weekend! Kuva
Samu Sarka, RFOT, FIN
Member of ERCCA
Extreme Route Crawlers

5x World Champion
18x European Champion
30x Nordic Champion
3x Sudics Champion
28x Finnish Champion
3x German Champion
2x US Champion
2x Spanish Champion
2x Italian Champion
2x Belgium Champion
Zarizi Tech
Moderator
Viestit: 4806
Liittynyt: To 26.04.2007 21:10
Paikkakunta: Rovaniemi
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja Zarizi Tech »

Todays agenda was to finish the rig. Kuva

Kuva
Made the holes for my new gorgerous skins. Kuva

Kuva
Here's the difference between new skin and one year old one. Kuva

Kuva
Shiny! Kuva

Kuva
Roof attached!

Kuva
Some of the sponsors right there! KuvaKuva

Kuva
One of the new ones. Kuva

Kuva
Before attaching the hood, I had to do some more soldering. I had to shortern the battery wires, cause I had made them too long.

Kuva
With that done, I now could attach the last part of the skins.

Kuva
Then I did a little clocking to my rear axle and now the motor is better covered. Kuva

Kuva
RTR weight is about the same as last year.

Kuva
Rig is already looking like a new. And I still haven't got two components for it...

Kuva
...a pair of brand new Team Brood Racing Nexus motors. 30T HHK-T. Kuva Can't wait to test them! I'll be driving next weekends comp with my Stubbies though, I think they'll do just fine. Kuva
Samu Sarka, RFOT, FIN
Member of ERCCA
Extreme Route Crawlers

5x World Champion
18x European Champion
30x Nordic Champion
3x Sudics Champion
28x Finnish Champion
3x German Champion
2x US Champion
2x Spanish Champion
2x Italian Champion
2x Belgium Champion
Zarizi Tech
Moderator
Viestit: 4806
Liittynyt: To 26.04.2007 21:10
Paikkakunta: Rovaniemi
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja Zarizi Tech »

Kuva
All set for the season beginner tomorrow!

Kuva
RFOT's Crawl Cup #1/12 The Arctic Special! Kuva
Samu Sarka, RFOT, FIN
Member of ERCCA
Extreme Route Crawlers

5x World Champion
18x European Champion
30x Nordic Champion
3x Sudics Champion
28x Finnish Champion
3x German Champion
2x US Champion
2x Spanish Champion
2x Italian Champion
2x Belgium Champion
Zarizi Tech
Moderator
Viestit: 4806
Liittynyt: To 26.04.2007 21:10
Paikkakunta: Rovaniemi
Viesti:

Re: #4 Koppensneller

Viesti Kirjoittaja Zarizi Tech »

New season is now opened for me.

Kuva
The very special comp in January. First annual Arctic Special. Kuva

Kuva
Course building took some time, but it was well worth it. Kuva

https://www.youtube.com/watch?v=NncooPv ... GFl4TY7TsQ
Here is course two. The grip was really suprisingly good when you keep in mind the ice on the rocks. Loving my Voodoos of course! Kuva

Kuva
Victory was made quite much already on the first course, where the narrow rig worked out the way excellent. Kuva

Kuva
Happy to get the first victory of the year. The rig was working really well and I'm already waiting for the next comp to come.

Kuva
Just adding the shock oils to the indoor competition. And of course the new motors. Kuva
Samu Sarka, RFOT, FIN
Member of ERCCA
Extreme Route Crawlers

5x World Champion
18x European Champion
30x Nordic Champion
3x Sudics Champion
28x Finnish Champion
3x German Champion
2x US Champion
2x Spanish Champion
2x Italian Champion
2x Belgium Champion
Vastaa Viestiin