Rainbow Dash

2.2s (shafty)

0
Ei ääniä
 
Ääniä yhteensä: 0

Juuti
Täysi jäsen
Viestit: 115
Liittynyt: To 19.03.2015 16:06
Paikkakunta: Lappeenranta

Rainbow Dash

Viesti Kirjoittaja Juuti » Pe 20.11.2015 19:53

Kuva

Ensi kaudelle uusi kilpailija tulossa kuvioihin... Päivitystä luvassa myöhemmin :)
Viimeksi muokannut Juuti, Pe 20.11.2015 19:53. Yhteensä muokattu 2 kertaa.

Zarizi Tech
Moderator
Viestit: 3665
Liittynyt: To 26.04.2007 21:10
Paikkakunta: Ylläsjärvi
Viesti:

Vs: Rainbow Dash

Viesti Kirjoittaja Zarizi Tech » Pe 20.11.2015 19:58

;D ;D
Samu Sarka, RFOT, FIN
President of ERCCA / Member of WRCRCO
DravTech ~ Ottsix ~ RC4WD ~ Offipaita ~ Krawler Konceptz

Hadesbear
Legendaarinen!
Viestit: 2246
Liittynyt: Su 29.11.2009 14:47
Paikkakunta: Säkylä
Viesti:

Vs: Rainbow Dash

Viesti Kirjoittaja Hadesbear » Pe 20.11.2015 20:23

Mukava saada uusi kuski mukaan kilpailemaan! Mielenkiinnolla odotellen kuvia autosta ja tuo logo..   ;D
Saku Sarka, RFOT, FIN

halme
Legendaarinen!
Viestit: 842
Liittynyt: Ma 23.06.2014 08:07
Paikkakunta: Hämeenlinna

Vs: Rainbow Dash

Viesti Kirjoittaja halme » Pe 20.11.2015 20:32

Ei kuitenkaan Rainbow Bash?   ;D

Juuti
Täysi jäsen
Viestit: 115
Liittynyt: To 19.03.2015 16:06
Paikkakunta: Lappeenranta

Vs: Rainbow Dash

Viesti Kirjoittaja Juuti » La 21.11.2015 09:53

I was "fortune" to test Zarizis and Arttus crawler last summer.
That started little thinking in my mind.
Hmm... should i build 2.2S??? Maybe even mod???
And then the sh*t hit the fan... I heard that there was 2 good crawlers 4 sale.
I didn't have any choise... Fire in my mind was 2 strong i couldn't say no.

New driver & renamed car(s) ;)

Kuva

-Specs:-

Chassis: Y-town villain chassis

Gearbox:

Axles:     Shortened AR60 whit tubes and OD front UD back
            Vanquish wraith knuckles and little weight :)
            Vanquish chubs

Driveshaft: WB8

Shocks: SCX10 shocks

Electronics: CC MicroSW & CC Bec
                Motor Team Brood Sisu :)
                Hitech HS-7950-TH servo

Wheels:       narrowed voodoo golds
                6.0soft CI comp cut front
                5.5med CI comp cut rear

And some pictures from the car. Only thing i have done to the car is.
New tyres and foams. Little wiring job.

Kuva

Kuva

Kuva

Kuva

Kuva

Kuva

Kuva

Kuva

See u all in the worlds :)
Viimeksi muokannut Juuti, La 21.11.2015 09:53. Yhteensä muokattu 2 kertaa.

Juuti
Täysi jäsen
Viestit: 115
Liittynyt: To 19.03.2015 16:06
Paikkakunta: Lappeenranta

Vs: Rainbow Dash

Viesti Kirjoittaja Juuti » To 15.12.2016 08:02

Time to update this topic!

Kuva

Anybody recognize the car?

Kuva

I have now four comps behind with this car.
And i like it a lot. The setup is good for my driving style.

Kuva

I like the Crawler Conceptz skins alot!
Hopefully i have money before worlds.
So i can order new skins from Crawler conceptz
Rainbows dash is not dragon!

Kuva

Down hilling i have to train more. little bit tricky with this car.
And that's not the only thing to train ;-)

Kuva

I was very happy for my standing in nordics -16
6th with this training amount

Kuva

Kuva

Last weekend was finnish series comp 2/6 2016
I was 4th in that comp. Only 2pts away from 3rd place

Kuva

Here is video from the comp. I think it was course 3/4.

<iframe width="560" height="315" src="https://www.youtube.com/embed/lI4_wqWwTYY" frameborder="0" allowfullscreen></iframe>

Only way is up the ladder!
Viimeksi muokannut Juuti, To 15.12.2016 08:02. Yhteensä muokattu 1 kertaa.

Juuti
Täysi jäsen
Viestit: 115
Liittynyt: To 19.03.2015 16:06
Paikkakunta: Lappeenranta

Vs: Rainbow Dash

Viesti Kirjoittaja Juuti » To 15.12.2016 08:16

Time to update this thread.
I have been training every week 1-3 times and it's starting to show.
I can drive lines that was impossible for me at the start of summer.

I had time to go two comps also
First comp was Finnish Rc Crawling Series -16 #3 Jämsä

1st place in there!! Ok Only 3 drivers on the comp and all the best drivers away. Holiday season.
Fun day still. Good courses and tricky terrain. Sometimes it was like driving on the ice.
Sand made the rocks very slippery. My slick voodoo tires in the 2.2M didn't work at all!!

Kuva

second comp was Rfot Crawl Cup -16 #4 Pirkkala

Day started little odd... Our comp place was taken by trick bicycle comp.
We had to get new spot for the comp. Luckly Rfot(Sarka) ppl had other place.
After the first shock it was good day. Very hard terrain to master. Forrest rocks.
Hard to flip car around. Fun day overall.
3rd place in that comp.

Kuva

Kuva

Kuva

Kuva

Next comp next weekend! Finnish Rc Series #4/5 in Naantali.
Can't wait to get there. I have seen pictures from the comp place
and it looks amazing. Mr.Dravtech is coming there to comp also

Little update coming to the rig.
New body cutted. New body Parma Xciter body like the old ones.

Kuva

I could have painted it my self but...

Kuva

Kuva

When u look at this and then u look at your self painted drifter...

Kuva

Kuva

U know it's not enough! So new body cut and send away for better hands :mrgreen:
Rainbow dash theme coming <3
Viimeksi muokannut Juuti, To 15.12.2016 08:16. Yhteensä muokattu 1 kertaa.

Juuti
Täysi jäsen
Viestit: 115
Liittynyt: To 19.03.2015 16:06
Paikkakunta: Lappeenranta

Vs: Rainbow Dash

Viesti Kirjoittaja Juuti » To 15.12.2016 08:17

It's time to update this thread again.
Lot have happened after last update.
Let's start from the last Finnish National series comp #Rauma 5/5 2016

Kuva

Huh difficult day it was. It started raining and the rocks where slippery as hell

Kuva

Kuva

Not so good day for me. Some gates turned out impossiple to drive and allready i had points full :(
Overall feeling good. Difficult gates and stupid drive lines.
But i have to test and learn

  Kuva

Kuva

Darra news reporter Arttu filming some shitty footage to our show
Kuva

4th place at the comp.  

Kuva

That secured my 2nd place on Finnish national series overall! 8)
Not bad first year

Kuva


Kuva

And ofcourse this is not the end for this year... Let's continue in new post.
Of course this would crash if long post
Viimeksi muokannut Juuti, To 15.12.2016 08:17. Yhteensä muokattu 1 kertaa.

Juuti
Täysi jäsen
Viestit: 115
Liittynyt: To 19.03.2015 16:06
Paikkakunta: Lappeenranta

Vs: Rainbow Dash

Viesti Kirjoittaja Juuti » To 15.12.2016 08:18

After the Rauma finnish nationals we had something special 8)
We organized 2 events on same weekend.
Rented cabin for our use nearby the comp place. It was nice place 8 people fitted nicely in there 8)
Saturday we had Hangover gatepuzzle
Scale event with 2 courses. About 200 gates to drive and no winners  

Kuva

Kuva

Kuva

Kuva

It was relaxing to go just drive and no worries about the clock on course.
After driving to the cabin and sauna and hot tub. Maybe couple beers ;-)

On sunday we had historical event.
The last RFOT's Crawl Cup event in history!
Nice comps good memories. This is not the end.
Start for something new
4th place again.  

Kuva

Kuva

Kuva

I live near this place. 30min drive. It is nice place to train and comp.

Kuva

Kuva

Kuva

Kuva

My friend drived with my cars that day.
I'm trying to lure him in the crawling

Kuva

I think the seed has been planted :)
Now it's good to start prepairing for the worlds.
Comp season is over in Finland. Winter is coming!!!
Viimeksi muokannut Juuti, To 15.12.2016 08:18. Yhteensä muokattu 1 kertaa.

Juuti
Täysi jäsen
Viestit: 115
Liittynyt: To 19.03.2015 16:06
Paikkakunta: Lappeenranta

Vs: Rainbow Dash

Viesti Kirjoittaja Juuti » To 15.12.2016 08:19

Time for little maintaince for the car before France worlds
Car has been working whole season. Couple drive shafts and nothing else broken! I think it has been tested to it's limits. I think samu can say the same. He has seen mee "driving" :lmao:
So car to the tabble and let's have a look.

Kuva

Kuva

Filled the shocks with 50th oil front and rear.
Opened the difd covers and everything was ok there.
Then i took the gearbox off...

Kuva

1 Bearing has something lost?!?
Opposite side bearing loose.
Ofcourse no shop in Finland got them!
Lucky Arto (R2) had couple extra in his shelf and he send me

Kuva

Kuva

Gearbox back in order. I have to say this Hulksta gearbox is good!
No wearing on the gears or the carbon. Somekind of cover would be nice.

Couple weeks before France painter started making me new body.
I was getting little scared could he make it in time

Kuva

Kuva

It was about week before leaving to worlds when i got the next images...

Kuva

Kuva

Kuva

Kuva

It was friday when postman delivered the box from Totte.
It had 2 bodies in it. One for my team mate Arttu and one for me.

Now i can call it official Rainbow Dash!!
I wanted new shock spring covers to match the body.
So quick measurements and sitting in front of the screen.
Made my first 3d model. Need to make adjustments to it.

Kuva

Kuva

I Made little tuning in the rear. I have been thinking the rear is too stiff.
Wanted little more twist to it.
Moved the rear upper links one hole nearer to each other.

Kuva

Had to curve the axle little bit to get the nut to fit.

Kuva

Now i like how the rear travels. We will see how this setup works in France.8)
Viimeksi muokannut Juuti, To 15.12.2016 08:19. Yhteensä muokattu 1 kertaa.

Juuti
Täysi jäsen
Viestit: 115
Liittynyt: To 19.03.2015 16:06
Paikkakunta: Lappeenranta

Vs: Rainbow Dash

Viesti Kirjoittaja Juuti » To 15.12.2016 08:20

Kuva

France worlds over. Huh what an event! Big thanks to organizers.
U guys made amazing work
Beer, pizza & food service on the beach
Short walk to comp site from the comp village. Under 10min
Restaurant dinner in the evening was nice. Good food and good company.
Comp village offered brilliant place for meeting other ppl in crawling.
Weather was wat it was...
Weather on friday (1.9 / Super)
Weather on saturday (2.2M) 8)
Weather on sunday (2.2M Finals / 2.2S)
That don't matter. So much fun!!!


Kuva


[url=http://"http://www.rccrawler.com/forum/axial-xr10/565836-drizzt-dourden.html"]Drizzt Do'Urden[/url] & Rainbow Dash first time on the comp site.


Kuva

It was so different to drive in those rocks. The rock has so much traction in it. Finland we have this slippery rocks only. It was so fun driving in there.
Changing the rear links place made big difference. Now it moves much better for my liking. Not what i want but closer.

Here is couple pics more. No pics from the comp... LAZY


Kuva

Kuva

Kuva

And where did i find my self on the score board?

Kuva

9th out of 54 drivers!
I had good feeling hole day and the car worked perfectly
Here is 1 video from the comp :)

<iframe width="560" height="315" src="https://www.youtube.com/embed/8s0i9hGp_gI" frameborder="0" allowfullscreen></iframe>

Good ending for my first year in crawling.
Winter is coming in Finland so no more driving.

Now it's good time to hide in the garage

Kuva
Viimeksi muokannut Juuti, To 15.12.2016 08:20. Yhteensä muokattu 1 kertaa.

Juuti
Täysi jäsen
Viestit: 115
Liittynyt: To 19.03.2015 16:06
Paikkakunta: Lappeenranta

Vs: Rainbow Dash

Viesti Kirjoittaja Juuti » To 15.12.2016 08:22

It was time to say good bye to narrowed AR60 in the front.
In rear i will keep the narrowed Ar60 with Xr lockouts.

Kuva

Kuva

Kuva

Short side was normal lenght. Long side was narrowed about 2cm.

Kuva

Kuva

With narrowed axle i didn't get enough steering for my liking.
And there was no room for more steering angle.
So now testing full widht AR60 in the front.

So it was time to take new and some used parts to the table.


Kuva

Kuva

Kuva  

I think this was supposed to go here and hold the servo stand...?

Kuva

It was 2 small i think... I couldn't trust it would hold in my beating.
So little bit longer worm and we are good to go

Kuva

Now i can trust that it will hold.

Kuva

So here we have the trust installed on the axle. LOOKING GOOD!

Kuva

Kuva

Kuva

Time for little Beefing

Kuva

In the narrowed version i didn't have tubes inside...
Ok 2cm piece in the narrowed part to get them hold together.
These tubes are from asiatees. Ok quality and prize. 14€ for axle.
Ofcourse the metal is not the same level as the Original Beeftubes.
I have 2 set's of them in the shelf. I don't want to use them to this project
Because...

Kuva

Kuva

I'm going to machine them open from upper part.

Old axle had original plastic link/shock mounts.
Now testing VP versions that i had in my wraith.

Kuva

Starting to look like winner axle ;-)
I like how the servo is sitting low.

Kuva

"New" locker. This is used in my wraith for over 1 year in brutal use.
Still zero sloppy.

Kuva

Old one is VP aluminium locker... No set screws so they were sloppy.

Kuva

Kuva

So it was time to but them in scale... Steel vs Aluminium!

Kuva

Kuva

Steel won! :shock: Ok it's machined much smaller. Aluminium locker that size would brake very easily. I think with set screws the aluminium version would weight 19g. Not big difference in weight.

So it was time to attach gear to the locker.
This is old OD gear from the narrowed axle. I can't see any wearing.
I don't know how old this is. I have driven 1 year and don't know how long Manu used it before that.

Kuva

Kuva

Kuva

So it was time to take the shafts to some tweaking to get more steering angle.

Kuva

Kuva

It was time look at the weights in the front.
VP versions weights.

Kuva

Kuva

Kuva

Old axles had 240g of weight.
Now i think i don't need so much becouse the tubes in axle.
So little sawing and we are good to go.

Kuva

Kuva

Kuva

Now i have 100g weight per side.
These weight's are machined nicely.

Kuva

They don't fit to my knucles so... Little twaeking is needed for these to fit.

Kuva

Kuva

I got these little bad boys from the Nordics -16 sponsor gift suffle.
Time to take them to action. Old axle had BTA so there was only 1 in the front. Now i need them both side becouse the steering rod comes in front.

Kuva

Axle "installed"
I need new titanium upper links. First some testing to get the lengt.

Kuva

Old links are about 1,5-2cm short.

Kuva

Need to change the electronic plate mount place.
So the servo sit's little lover and ofcourse the electronics.

Kuva

Got my self 3d printer   :)

Kuva

Kuva

Now i think i have more motivation to train how to make 3d models
I don't have to wait that my friend has time to make the print.

First part for my safty. Rear weight holder.
This is only prototype made from PLA.
I think i will make the final version from BLA and if i can get Nintek Armadillo then make them from that.
Armadillo Shore Hardness = 75D
Abrasion resistance 84% better than PLA   and 60% better than ABS
https://ninjatek.com/products/filaments/armadillo/

Kuva

Kuva

Fitted nicely for these wheels.

Kuva

They are little bit out from the wheel. That don't matter becouse i have to make the rear little narrower so then they will go inside of the wheel.

Kuva

This is all for now... more in the near future 8)

Juuti
Täysi jäsen
Viestit: 115
Liittynyt: To 19.03.2015 16:06
Paikkakunta: Lappeenranta

Re: Rainbow Dash

Viesti Kirjoittaja Juuti » Su 17.09.2017 21:33

Damn whole crawling season 2017 is over and i haven't updated my build threads. :evil:
Ok i have been busy studying video editing and other stuff...
Now i have time so let's continue where we left the story.
-----------------------------------------------------------

Let's continue where we left in the winter...

Kuva

Kuva

When i ordered Front servo & link thruss also ordered rear link truss.
Then i realized it won't work with my narrowed Ar60 axle.
Center point is different in narrowed ar60 than normal widht.

Kuva

Kuva

there is small aluminum tube inside where the screw go.
This can take some serious beating. 20ft drops and so on...

Kuva
Kuva

Kuva

So old trusty y-town rear truss. I think it's made by y-town?
Somebody wiser can tell.

Kuva
I think it's missing something? Is it trying to learn to fly or something?
Who knows...

Kuva

What do u got there?

Kuva

Kuva

3mm Titanium rods i see.
Time to make some upper links.

Kuva

Kuva

Kuva

Kuva

precise measurements and let's cut. XD

Kuva

Kuva

Links ready. Here is tools that i used + WD40 for lubrication.
Tools were ok for this job. Not the hardest grade titanium.

Kuva

I like how full widht axle turns much more than narrowed did.

Juuti
Täysi jäsen
Viestit: 115
Liittynyt: To 19.03.2015 16:06
Paikkakunta: Lappeenranta

Re: Rainbow Dash

Viesti Kirjoittaja Juuti » Ma 16.10.2017 22:02

Links ready so it was time to tinker with the propeller shafts.

Kuva

Kuva

Kuva

U can see that i had some problem with the drive shaft.
Axial WB8 HD shaft is hitting the link in the rear. Not good at all :evil:
Also in the front it gets bended easily. even with the glued aluminum tube inside.

Kuva

Kuva

It was time to make order from SDI

Kuva

S.D.I PROPELLER SHAFT (5mm to 5mm)
--Link to S.D.I page--

Very good shafts i can say. My team mate has been running them 2-3years without any breakage. I drived this season without any problems.

Also they are lighter and smaller than old Wb8 Hd "thumbsup"

Kuva

Kuva

Kuva

Kuva

They were very easy to shorten to right lenght.

Kuva

Kuva

They come with short set screw that i changed.
Axial diff outputs have holes so i had laying around these longer screws.(Don't know what they are called)
Had to cut them to fit.

Kuva

Kuva

Kuva

Now the upper links have space between the shafts

Kuva

I had to place some spacer so that the bearing would not pop out.

Kuva

--Another link to S.D.I Propeller safts that i used in this project---

If u missed the first one

Let's continue the story some other day.
Family chores are calling

Juuti
Täysi jäsen
Viestit: 115
Liittynyt: To 19.03.2015 16:06
Paikkakunta: Lappeenranta

Re: Rainbow Dash

Viesti Kirjoittaja Juuti » La 21.10.2017 22:29

It was time to go to the drawing board.
It was time to make some rear weight hangers.
So that this pony don't fly away!

Ordered some weight from Dravtech
-Link to Dravtech weights--
Tungsten cylinders that have the same dimensions as the Pinewood Derby 0.5 oz slugs.

Kuva

Few measurements and this is what i got out from my head...

Kuva

Kuva

On the right side is the first version that i tested fitness inside the wheel and so that the weights fit. On the left side is the "Final" piece.

Kuva

Kuva

Kuva

Changed the rear shock/link mounts also to VP versions.

Kuva

Kuva

Kuva

I like the look of them alot and they can take some beating.
My Wraith have them also and zero issues.
There was other versions that i wanted but nobody produced them at that time.

Next i took out the gearbox and motor.
Time to check that everything is ok with them.

Kuva

Of course i had to place them on the scale

Kuva

I like the Hulksta engineerin gearbox.
Zero issues with it. I think i have driven over 200 packs now with it.
It works with XR10 gears that are not so easy to find anymore
Go check his facebook page. He has some interesting stuff there
--Link to Hulksta Facebook page---

Kuva

And for the motor part. Team Brood Sisu motor.
I don't know the turn count. I have to check from the shaft next winter when i do the maintenance to it. 35t i would guess
If u don't know what Sisu means here is translate from Finnish to English
"Determination regardless of cost" And this motor has it!
--Link to Team Broods Sisu motor page--

Juuti
Täysi jäsen
Viestit: 115
Liittynyt: To 19.03.2015 16:06
Paikkakunta: Lappeenranta

Re: Rainbow Dash

Viesti Kirjoittaja Juuti » La 21.10.2017 22:30

So it was time to start building the electronics for the summer.

CC Micro Sidewinder

Kuva

Of course i CC Bec 10a. Capacitor removed if u think it looks odd.

Kuva

Little bit of soldering and we are good to go waterproofing the backet.

Kuva

Kuva

I'm using Rubbercomp to shield my electronics from water.
Zero failures with this goo. Only thing i regret is that i didn't take transparent version. When this can is over next will be transparent. Easier to see what lights are blinking :)


Kuva

Kuva

This is how it looks after drying.

Kuva

Kuva

I have this expensive waterproof sanwa receiver...
Of course i have to dissamble it so i can get the extra grams out of the weight

Kuva

Kuva

Kuva

Ok to be honest i did it because of this.

Kuva

Now it won't hit my body anymore in full squat.

I had to make new battery mount.
Little bit of cardboard and aluminum sheet.

Kuva

Here we have the finished product.
I would liked to paint it. I didn't have time

Kuva

Kuva

It was time to tinker with the servo arm.
It was little tricky to get it so low that it would turn the wheels enough.
I managed to do that with little grinding and we are good to go.

Kuva

Kuva

Here is picture from the upper link setup that i'm running.

Front

Kuva

Rear

Kuva


I think the car is ready for the first run

Kuva

RTR weight.
4,045lb (64,73Oz)

Kuva

Short test in my home course... S*itty course if u ask me.
I throw old bricks on the ground when i was renovating my house.

Kuva

Kuva

Kuva

Everything worked so it was time to go first time to go first training session of the year...

Juuti
Täysi jäsen
Viestit: 115
Liittynyt: To 19.03.2015 16:06
Paikkakunta: Lappeenranta

Re: Rainbow Dash

Viesti Kirjoittaja Juuti » La 21.10.2017 22:32

First training session was failure.
Only 1 course driven.
Servo was moving left to right by itself.

This is what i found

Kuva

Bec receiver cables worn out

Kuva

Kuva

Time to take rubbercomp off and start soldering new wires to bec.

Kuva

Kuva

Kuva


New wires ready for soldering.
I bought couple years ago 10 sets of this replacement wires.


Kuva


New Wires soldered. I hope it works.
It stopped completely working after first training course.


Kuva

Testing does it work...

Kuva

Yes! It works "thumbsup"
This is common problem with CC micro Sidewinders and CC Bec 10A
I have fixxed with same method two micro sidewinders and two 10 becs

Time for new bath of rubbercomp

Kuva

Ready for next battle

Kuva

Also i had to make adjustments to receiver.
With the antenna inside cable sock car was moving not so good after 2m of distance.
So had to take it out.

Kuva

Now the car was ready for it's first and last training session
before first Finnish RC Crawling series comp 2017.

Juuti
Täysi jäsen
Viestit: 115
Liittynyt: To 19.03.2015 16:06
Paikkakunta: Lappeenranta

Re: Rainbow Dash

Viesti Kirjoittaja Juuti » La 21.10.2017 22:33

One training sessions and it was time to go seasons first comp :twisted:
Finnish RC Crawling series 2017 start now!

First comp out of five comps was held in Helsinki, Viikki.
New spot for everybody. It was nice place to hold comp.
Few pictures from the comp place.
Thanks to Zarizi Tech for pictures.
-Link to better quality and much more pictures-
https://zarizitech.nn.fi/kuvat/Finnish+ ... +Helsinki/

Kuva

Kuva

Kuva

We had many ppl participating in season start. Not 100% sure was it record. That's the way to start season.

Kuva

Kuva

Kuva

Kuva

Kuva

Kuva

There was good amount scale ppl also.
I like that we run Scale & Crawling comps together at the same time.
Good way to get scale ppl to the dark side

Kuva

My driving was not so good. Out of time in one course
4th place overall. Ok result with this amount of training and new setup.

Kuva

Man needs more training!
Ok second season for me so there is time evolve.
More training with the new setup.
Overall i'm very happy with the new setup.
I like it more than narrowed Ar60 in the front.
More turning angle to the tires.
I like the extra weight from the beeftubes.

Here is video from the comp.
Course 4/4 -39pts

Viimeksi muokannut Juuti, La 21.10.2017 22:35. Yhteensä muokattu 1 kertaa.

Juuti
Täysi jäsen
Viestit: 115
Liittynyt: To 19.03.2015 16:06
Paikkakunta: Lappeenranta

Re: Rainbow Dash

Viesti Kirjoittaja Juuti » La 21.10.2017 22:34

Last training before Rc Rock Crawling Nordics -17!
This is what happened!

Kuva

Kuva

Broke two wheels and bend front upper links.
No time or money to order new wheels before Nordics.

So i had to use the same wheels that i use in my 2.2M car.

Kuva

CI 6 Bolt wheels 1" and Voodoo pins (gold)

There was one problem with these wheels. I could not get offset in front narrow enough with these wheels and full widht AR60 axles.
It ended 1cm wider than i would like it to be.

No time to moan. It's Nordics time and it's moving forward so let's go!

Vastaa Viestiin